THE FOLLOWING ACCESSORIES WILL BE DOCUMENTED BELOW
Click or Scroll Down
No. 413 COUNTDOWN CONTROL PANEL
No. 415 FUELING STATION 1955-1957
No. 456 OPERATING COAL RAMP AND HOPPER CAR
No. 460 PIGGY BACK TRANSPORTATION SET
DIFFERENT TYPES OF FORKLIFTS USED ON No. 460 AND No. 461
No. 460P PLATFORM
No. 460 – 150 TWO TRAILERS
No. 461 PLATFORM WITH TRUCK AND TRAILER
No. 494 ROTARY BEACON 1954 – 1966
No. 413 COUNTDOWN CONTROL PANEL
unpainted gray plastic with black lettering
bottom view
picture box flap# 413 – 8
Inst. # 413 – 11 dated 9 – 62 printed in black on white, 4 pages paper
No. 415 FUELING STATION 1955-1957
No. 415 FUELING STATION
1955 – 1957
white unpainted house walls with red painted trim
the yellow, blue and red all unpainted plastic
A0110
packet No. 415-126
No. 90 controller
4 No. 81-32 connecting wires
No. 415-124 instruction sheet (shown below)
ROBERT GAIR CO. No. 415-120 undated
instructions No. 415-124 dated 9-55
No. 456 OPERATING COAL RAMP AND HOPPER CAR
MOCKUP FOR THE No. 3456 OPERATING HOPPER CAR
catalog showing mock-up LEHIGH VALLEY operating hopper on the the “NEW” and “AMAZING” No. 456 operating coal ramp
TYPE 1 shell
top view showing where the shoots have been machined open
bottom view showing original LIONEL door and plunger installed
H0151
Click HERE for detailed information on small hopper types
No. 456 OPERATING COAL RAMP AND HOPPER CAR
1950 early
sheet metal and die cast construction painted dark gray
with braided wire handrails
with black covers on the two electromagnets between the rails near top
with red light on the top of the rear pier
A0077
early 1950 ramp came with a TYPE 2 operating hopper car in a mid classic box flap # 3456-26
later 1950 ramp came with a TYPE 4 operating hopper car in a mid classic box flap # 3456-26
No. 456C controler with three buttons
No. 456-83 maroon coal hopper with No. 456-84 blackened metal slide door
No. 206 bag of artificial coal
No. 456-5 packet
two coal bin mounting posts
small envelope containg two No. 4-40 3/16″ binding head screws for use with “O” gauge track and two No. 2-56 3/16″ round head screws for use with “027” gauge track
with instruction sheet No. 456-93 dated 11-50
No. 456 OPERATING COAL RAMP AND HOPPER CAR
1950 – 1955
sheet metal and die cast construction painted light gray
with fish line type handrails
without black covers on the two electromagnets between the rails near top
with red light on the top of the rear pier
A0078
No. 456C controler with three buttons
No. 456-83 maroon coal hopper with No. 456-84 blackened metal slide door
No. 206 bag of artificial coal
No. 456-5 packet
two coal bin mounting posts
small envelope containg two No. 4-40 3/16″ binding head screws for use with “O” gauge track and two No. 2-56 3/16″ round head screws for use with “027” gauge track
with instruction sheet No. 456-93 dated 11-50
How the No. 456 was packed with liners
BOXES
1950
unsold old inventory with OPS sticker
A0078
St. Joe Paper Co., No. 456-95, dated 1950, orange and blue printing
1950
without printed OPS information
A0371
St. Joe Paper Co., No. 456-95, dated 1950, blue printing
1951
unsold old inventory with OPS sticker
A0096
St. Joe Paper Co., No. 456-95, dated 1951, with blue printing
1952
with printed OPS information
A0219
Robert Gair Company, Inc., No. 456-95, undated, with blue printing
INSTRUCTIONS
No. 456-93 dated 10-50
No. 456-93 dated 11-50
No. 456-93 dated 3-51
No. 456-93 dated 5-52
No. 456-93 dated 6-53
No. 460 PIGGY BACK TRANSPORTATION SET
note the three liners, one holding the two trailers (left), one holding the flatcar (right), and the center one to keep everything in place
note that the platform for the No. 460 has the recesses for the trailer’s rear wheels and landing gear
Inst # 460 – 70 dated 10 – 55 printed blue on white paper, 2 pages, placed loose in center area
DIFFERENT TYPES OF FORKLIFTS USED ON
No. 460 AND No. 461
FORKLIFT THAT HAS BLACK SIGN WITH WHITE LETTERING GLUED TO BOTH SIDES OF THE FORKLIFT
FORKLIFT THAT HAS WHITE LETTERING RUBBER STAMPED ON BOTH SIDES OF THE FORKLIFT
FORKLIFT FOR THE No.461 PLATFORM WITH TRUCK AND TRAILER NOTE THE ABSENCE OF THE SIGN AND THE DIFFERENT STEERING WHEEL POST
all platforms have the same bottom
No. 460 PLATFORM WITH FORKLIFT THAT HAS BLACK SIGN WITH WHITE LETTERING GLUED TO BOTH SIDES OF THE FORKLIFT
note that the platform for the No. 460 has the recesses for the trailer’s rear wheels and landing gear
No. 460 PLATFORM WITH FORKLIFT THAT HAS WHITE LETTERING RUBBER STAMPED ON BOTH SIDES OF THE FORKLIFT
SEPARATE SALE PLATFORM
No. 460P PLATFORM
note that the platform for the No. 460 has the recesses for the trailer’s rear wheels and landing gear
A0735
note the white rubber stamped lettering on this side of forklift only
note the absence of lettering on this side of forklift only
packed with one liner
end view
end view
side view
side view
top view
bottom view
SEPARATE SALE TRAILERS
No. 460 – 150 TWO TRAILERS
late classic box flap # 460-156
late classic box flap # 460-156
No. 461 PLATFORM WITH TRUCK AND TRAILER
note that the platform for the No. 461 does not have the recesses for the trailer’s rear wheels and landing gear
corrugated box # 461 -10 made by BELL CONTAINER CORP.
note that the top (left) and bottom (right) are both stapled close not taped
No. 494 ROTARY BEACON 1954 – 1966
No. 494 ROTARY BEACON
constructed of steel painted silver
with nameplate held on with tabs through base with serif lettering
A0180
INSTRUCTIONS
instructions, Form No. 494 – 38, dated 3 – 57, printed brown on yellow paper, two pages
WHERE WOULD YOU LIKE TO GO NOW ?